- 50 Kallang Pudding Road #01-06, AMA Building Singapore 349326
| Standard | Title |
| IEC 60028 | International standard of resistance for copper |
| IEC 60038 | IEC standard voltages |
| IEC 60050-461 | International electrotechnical vocabulary. Chapter 461: Electric cables |
| IEC 60055-1 | Paper insulated metal sheathed cables for rated voltages up to 18/30kV (with copper or aluminium conductors and excluding gas pressure and oil-filled cables) Part 1: tests on cables and their accessories |
| IEC 60055-2 | Paper insulated metal sheathed cables for rated voltages up to 18/30kV (with copper or aluminium conductors and excluding gas pressure and oil-filled cables) Part 2: general and construction requirements |
| IEC 60092-101 | Electrical installations in ships Part 101: definitions and general requirements |
| IEC 60092-350 | Electrical installations in ships – Part 350: shipboard power cables – general construction and test requirements |
| IEC 60092-351 | Electrical installations in ships – Part 351: insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables |
| IEC 60092-352 | Electrical installations in ships – Part 352: choice and installation of electrical cables |
| IEC 60092-353 | Electrical installations in ships – Part 353: single and multicore non-radial power cables with extruded solid insulation for rated voltages 1kV and 3kV |
| IEC 60092-354 | Electrical installations in ships – Part 354: single and 3 core power cables with extruded solid insulation for rated voltages 6kV up to 30kV |
| IEC 60092-359 | Electrical installations in ships – Part 359: sheathing materials for shipboard power and telecommunication cables |
| IEC 60092-373 | Electrical installations in ships. Shipboard telecommunication cables and radio-frequency cables. Shipboard flexible coaxial cables |
| IEC 60092-374 | Electrical installations in ships. Shipboard telecommunication cables and radio-frequency cables. Telephone cables for non-essential communication services |
| IEC 60092-375 | Electrical installations in ships. Shipboard telecommunication cables and radio-frequency cables. General instrumentation, control and communication cables |
| IEC 60092-376 | Electrical installations in ships – Part 376:cables for control and instrumentation circuits 150/250V |
| IEC 60096-0-1 | Radio frequency cables Part 0: guide to the design of detailed specifications. Section one: coaxial cables |
| IEC 60096-1 | Radio frequency cables Part 1: general requirements and measuring methods |
| IEC 60096-2 | Radio frequency cables Part 2: relevant cable specifications |
| IEC 60096-3 | Radio frequency cables Part 3: general requirementsand tests for single-unit coaxial cables for use in cabled distribution systems |
| IEC 60096-4-1 | Radio frequency cables Part 4: specification for superscreened cables Section1: general requirements and test methods |
| IEC 60141-1 | Tests of oil-filled and gas-pressure cables and their accessories – Part 1: oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessoires for alternating voltages up to and including 500kV |
| IEC 60141-2 | Tests of oil-filled and gas-pressure cables and their accessories – Part 2: internal gas-pressure cables and accessories for alternating voltages up to 275kV |
| IEC 60169-10 | Radio-frequency connectors. Part 10: RF coaxial connectors with inner diameter of outer conductor 3mm with snap-on coupling. Characteristic impedance 50 ohms |
| IEC 60169-11 | Radio-frequency connectors. Part 11: RF coaxial connectors with inner diameter of outer conductor 9.5mm with screw coupling. Characteristic impedance 50 ohms |
| IEC 60169-13 | Radio-frequency connectors. Part 13: RF coaxial connectors with inner diameter of outer conductor 5.6mm. Characteristic impedance 75 ohms |
| IEC 60169-14 | Radio-frequency connectors. Part 14: RF coaxial connectors with inner diameter of outer conductor 5.6mm. Characteristic impedance 75 ohms |
| IEC 60169-15 | Radio-frequency connectors. Part 15: RF coaxial connectors with inner diameter of outer conductor 4.13mm with screw coupling. Characteristic impedance 50 ohms |
| IEC 60169-17 | Radio-frequency connectors. Part 17: RF coaxial connectors with inner diameter of outer conductor 6.5mm with screw coupling. Characteristic impedance 50 ohms |
| IEC 60169-18 | Radio-frequency connectors. Part 18: RF coaxial connectors with inner diameter of outer conductor 2.79mm with screw coupling. Characteristic impedance 50 ohms |
| IEC 60169-19 | Radio-frequency connectors. Part 19: RF coaxial connectors with inner diameter of outer conductor 2.08mm with snap coupling. Characteristic impedance 50 ohms |
| IEC 60169-20 | Radio-frequency connectors. Part 20: RF coaxial connectors with inner diameter of outer conductor 2.08mm with screw coupling. Characteristic impedance 50 ohms |
| IEC 60169-21 | Radio-frequency connectors. Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9.5mm with different versions of screw coupling. Characteristic impedance 50 ohms |
| IEC 60169-22 | Radio-frequency connectors. Part 22: RF two-pole bayonet coupled connectors for use with shielded balanced cables having twin inner conductors |
| IEC 60169-24 | Radio-frequency connectors. Part 24: RF coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F) |
| IEC 60169-26 | Radio-frequency connectors. Part 26: RF coaxial connectors with screw coupling. Characteristic impedance 50 ohms |
| IEC 60169-27 | Radio-frequency connectors. Part 27: RF coaxial connectors with screw coupling, typically for use in 75ohm cable distribution systems (Type E) |
| IEC 60169-28 | Radio-frequency connectors. Part 28: RF coaxial connectors with inner diameter of outer conductor 6.5mm with snap coupling. Characteristic impedance 75 ohms |
| IEC 60173 | Colours of the cores of flexible cables and cores |
| IEC 60183 | Guide to the selection of high-voltage cables |
| IEC 60189-1 | Low-frequency cables and wires with PVC insulation and PVC sheath Part 1: general test and measuring methods |
| IEC 60189-2 | Low-frequency cables and wires with PVC insulation and PVC sheath Part 2: cables in pairs, triples, quads and quintuples for inside installations |
| IEC 60189-3 | Low-frequency cables and wires with PVC insulation and PVC sheath Part 3: equipment wires with solid or stranded conductor, PVC insulated in singles, pairs and triples |
| IEC 60228 | Conductors of insulated cables |
| IEC 60229 | Test on cable oversheaths which have a special protective function and are applied by extrusion |
| IEC 60230 | Impulse tests on cables and their accessories |
| IEC 60245-1 | Rubber insulated cables – rated voltages up to and including 450/750 V Part 1: general requirements |
| IEC 60245-2 | Rubber insulated cables – rated voltages up to and including 450/750 V Part 2: test methods |
| IEC 60245-3 | Rubber insulated cables – rated voltages up to and including 450/750 V Part 3: heat resistant silicone insulated cables |
| IEC 60245-4 | Rubber insulated cables – rated voltages up to and including 450/750 V Part 4: cords and flexible cables |
| IEC 60245-5 | Rubber insulated cables – rated voltages up to and including 450/750 V Part 5: lift cables |
| IEC 60245-6 | Rubber insulated cables – rated voltages up to and including 450/750 V Part 6: arc welding electrode cables |
| IEC 60245-7 | Rubber insulated cables – rated voltages up to and including 450/750 V Part 7: heat resistant ethylene-vinyl acetate rubber |
| IEC 60245-8 | Rubber insulated cables – rated voltages up to and including 450/750 V Part 8: cords for applications requiring high flexibility |
| IEC 60227-1 | Polyvinyl chloride insulated cables for rated voltages up to and including 450/750 V Part 1: general reqiurements |
| IEC 60227-2 | Polyvinyl chloride insulated cables for rated voltages up to and including 450/750 V Part 2: test methods |
| IEC 60227-3 | Polyvinyl chloride insulated cables for rated voltages up to and including 450/750 V Part 3: non-sheathed cables for fixed wiring |
| IEC 60227-4 | Polyvinyl chloride insulated cables for rated voltages up to and including 450/750 V Part 4: sheathed cables for fixed wiring |
| IEC 60227-5 | Polyvinyl chloride insulated cables for rated voltages up to and including 450/750 V Part 5: flexible cables |
| IEC 60227-6 | Polyvinyl chloride insulated cables for rated voltages up to and including 450/750 V Part 6: lift cables and cables for flexible connections |
| IEC 60227-7 | Polyvinyl chloride insulated cables for rated voltages up to and including 450/750 V Part 7: flexible cables screened and unscreened with two or more conductors |
| IEC 60228 | Electrical conductors of insulated cable |
| IEC 60287-1-1 | Electric cables – calculation of the current rating – Part 1: current rating equations (100% load factor) and calculation of losses – Section 1:general |
| IEC 60287-1-2 | Electric cables – calculation of the current rating – Part 1: current rating equations (100% load factor) and calculation of losses -Section 2:sheath eddy current loss factors for two circuits in flat formation |
| IEC 60287-1-3 | Electric cables – calculation of the current rating – Part 1: current rating equations (100% load factor) and calculation of losses -Section 3:current sharing between parallel single-core cables and calculation of circulating current losses |
| IEC 60287-2-1 | Electric cables – calculation of the current rating – Part 2: thermal resistance -Section 1:calculation of thermal resistance |
| IEC 60287-2-2 | Electric cables – calculation of the current rating – Part 2: thermal resistance -Section 2:a method for calculating reduction factors for groups of cables in free air, protected from solar radiation |
| IEC 60287-3-1 | Electric cables – calculation of the current rating – Part 3: sections on operating conditions – Section1:reference operating conditions and selection of cable type |
| IEC 60287-3-2 | Electric cables – calculation of the current rating – Part 3: sections on operating conditions – Section2:economic optimisation of power cable size |
| IEC 60304 | Standard colours for insulation for low-frequency cables and wires |
| IEC 60331-11 | Tests for electric cables under fire conditions – circuit integrity – Part 11: apparatus – fire alone at a flame temperature of at least 750 deg C |
| IEC 60331-12 | Tests for electric cables under fire conditions – circuit integrity – Part 12: apparatus – fire with shock at a temperature of at least 830 deg C |
| IEC 60331-21 | Tests for electric cables under fire conditions – circuit integrity – Part 21: procedures and requirements – cables of rated voltage up to and including 0.6/1.0kV |
| IEC 60331-23 | Tests for electric cables under fire conditions – circuit integrity – Part 23: procedures and requirements – electric data cables |
| IEC 60331-25 | Tests for electric cables under fire conditions – circuit integrity – Part 25: procedures and requirements – optical fibre cables |
| IEC 60331-31 | Tests for electric cables under fire conditions – circuit integrity – Part 31: procedures and requirements for fire with shock – cables of rated voltage up to and including 0.6/1.0kV |
| IEC 60332-1-1 | Tests on electric and optical fibre cables under fire conditions Part 1: test for vertical flame propagation for a single insulated wire or cable Section 1: apparatus |
| IEC 60332-1-2 | Tests on electric and optical fibre cables under fire conditions Part 1: test for vertical flame propagation for a single insulated wire or cable Section 2: procedure for 1kW pre-mixed flame |
| IEC 60332-1-3 | Tests on electric and optical fibre cables under fire conditions Part 1: test for vertical flame propagation for a single insulated wire or cable Section 3: procedure for determination of flaming droplets/particles |
| IEC 60332-2-1 | Tests on electric and optical fibre cables under fire conditions Part 2: test for vertical flame propagation for a single small insulated wire or cable Section 1: apparatus |
| IEC 60332-2-2 | Tests on electric and optical fibre cables under fire conditions Part 2: test for vertical flame propagation for a single small insulated wire or cable Section 2: procedure for diffusion flame |
| IEC 60332-3-10 | Tests on electric cables under fire conditions Part 3: test for vertical flame spread of vertically-mounted bunched wires or cables Section 10: apparatus |
| IEC 60332-3-21 | Tests on electric cables under fire conditions Part 3: test for vertical flame spread of vertically-mounted bunched wires or cables Section 21: category A F/R |
| IEC 60332-3-22 | Tests on electric cables under fire conditions Part 3: test for vertical flame spread of vertically-mounted bunched wires or cables Section 22: category A |
| IEC 60332-3-23 | Tests on electric cables under fire conditions Part 3: test for vertical flame spread of vertically-mounted bunched wires or cables Section 23: category B |
| IEC 60332-3-24 | Tests on electric cables under fire conditions Part 3: test for vertical flame spread of vertically-mounted bunched wires or cables Section 24 category C |
| IEC 60332-3-25 | Tests on electric cables under fire conditions Part 3: test for vertical flame spread of vertically-mounted bunched wires or cables Section 25 category D |
| IEC 60344 | Guide to the calculation of resistance of plain and coated copper conductors of low-frequency cables and wires |
| IEC 60371-3-8 | Insulating materials based on mica Part 3: specifications for individual materials Section 8: mica paper tapes for flame-resistant security cables |
| IEC 60502-1 | Power cables with extruded insulation and their accessories for rated voltages from 1kV to 30kV Part 1:cables for rated voltages of 1kV and 3kV |
| IEC 60502-2 | Power cables with extruded insulation and their accessories for rated voltages from 1kV to 30kV Part 2:cables for rated voltages from 6kV up to 30kV |
| IEC 60502-4 | Power cables with extruded insulation and their accessories for rated voltages from 1kV to 30kV Part 4:test requirements on accessories for cables with rated voltages from 6kV up to 30kV |
| IEC 60584-3 | Thermocouples. Part 3: extension and compensating cables – tolerances and identification system |
| IEC 60702-1 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750V Part 1: cables |
| IEC 60702-2 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750V Part 2: terminations |
| IEC 60708 | Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath |
| IEC 60719 | Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750V |
| IEC 60724 | Short-circuit temperature limits of electric cables with rated voltages of 1kV and 3kV |
| IEC 60754-1 | Test on gases evolved during combustion of materials from cables. Part 1:determination of the amount of halogen acid gas |
| IEC 60754-2 | Test on gases evolved during combustion of materials from cables. Part 2:determination of the degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity |
| IEC 60793-1-1 | Optical fibres. Part 1: measurement methods and test procedures. Section 1: general & guidance |
| IEC 60793-1-20 | Optical fibres. Part 1: measurement methods and test procedures. Section 20: fibre geometry |
| IEC 60793-1-21 | Optical fibres. Part 1: measurement methods and test procedures. Section 21: coating geometry |
| IEC 60793-1-22 | Optical fibres. Part 1: measurement methods and test procedures. Section 22: length measurement |
| IEC 60793-1-30 | Optical fibres. Part 1: measurement methods and test procedures. Section 30: fibre proof test |
| IEC 60793-1-31 | Optical fibres. Part 1: measurement methods and test procedures. Section 31: tensile strength |
| IEC 60793-1-32 | Optical fibres. Part 1: measurement methods and test procedures. Section 32: coating strippability |
| IEC 60793-1-33 | Optical fibres. Part 1: measurement methods and test procedures. Section 33: stress corrosion susceptibility |
| IEC 60793-1-34 | Optical fibres. Part 1: measurement methods and test procedures. Section 34: fibre curl |
| IEC 60793-1-40 | Optical fibres. Part 1: measurement methods and test procedures. Section 40: attenuation |
| IEC 60793-1-41 | Optical fibres. Part 1: measurement methods and test procedures. Section 41: bandwidth |
| IEC 60793-1-42 | Optical fibres. Part 1: measurement methods and test procedures. Section 42: chromatic dispersion |
| IEC 60793-1-43 | Optical fibres. Part 1: measurement methods and test procedures. Section 43: numerical aperture |
| IEC 60793-1-44 | Optical fibres. Part 1: measurement methods and test procedures. Section 44: cutt-off wavelength |
| IEC 60793-1-45 | Optical fibres. Part 1: measurement methods and test procedures. Section 45: mode field diameter |
| IEC 60793-1-46 | Optical fibres. Part 1: measurement methods and test procedures. Section 46: monitoring of changes in optical transmittance |
| IEC 60793-1-47 | Optical fibres. Part 1: measurement methods and test procedures. Section 47: macrobending loss |
| IEC 60793-1-48 | Optical fibres. Part 1: measurement methods and test procedures. Section 46: polarisation mode dispersion |
| IEC 60793-1-49 | Optical fibres. Part 1: measurement methods and test procedures. Section 49: differential mode delay |
| IEC 60793-1-50 | Optical fibres. Part 1: measurement methods and test procedures. Section 50: damp heat |
| IEC 60793-1-51 | Optical fibres. Part 1: measurement methods and test procedures. Section 51: dry heat |
| IEC 60793-1-52 | Optical fibres. Part 1: measurement methods and test procedures. Section 52: change of temperature |
| IEC 60793-1-53 | Optical fibres. Part 1: measurement methods and test procedures. Section 53: water immersion |
| IEC 60793-1-54 | Optical fibres. Part 1: measurement methods and test procedures. Section 54: gamma irradiation |
| IEC 60793-2 | Optical fibres. Part 2: product specifications – general |
| IEC 60794-1-1 | Optical fibre cables Part 1: generic specification Section 1: general |
| IEC 60794-1-2 | Optical fibre cables Part 1: generic specification Section 2: basic optical cable test procedures |
| IEC 60794-2-10 | Optical fibre cables. Part 2: Indoor cables Section 10:sectional specification |
| IEC 60794-2-11 | Optical fibre cables. Part 2: Indoor cables Section 11:detailed specification for simplex and duplex cables for use in premises cabling |
| IEC 60794-2-21 | Optical fibre cables. Part 2: Indoor cables Section 21:detailed specification for multi-fibre optical distribution cables for use in premises cabling |
| IEC 60794-3 | Optical fibre cables. Part 3: sectional specification – outdoor cables |
| IEC 60794-3-10 | Optical fibre cables. Part 3: sectional specification – outdoor cables Section 10: family specification for duct and directly buried optical telecommunication cables |
| IEC 60794-3-12 | Optical fibre cables. Part 3: sectional specification – outdoor cables Section 12: detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling |
| IEC 60811-1-1 | Common test methods for insulating and sheathing materials of electric cables and optical cables. Part 1: methods for general application Section 1:measurement of thickness and overall dimensions – tests for determining the mechanical properties |
| IEC 60811-1-2 | Common test methods for insulating and sheathing materials of electric cables and optical cables. Part 1: methods for general application Section 2: thermal ageing methods |
| IEC 60811-1-3 | Common test methods for insulating and sheathing materials of electric cables and optical cables. Part 1: methods for general application Section 3:methods for determining the density – water absorption tests – shrinkage test |
| IEC 60811-1-4 | Common test methods for insulating and sheathing materials of electric cables and optical cables. Part 1: methods for general application Section 4: test at low temperature |
| IEC 60811-2-1 | Common test methods for insulating and sheathing materials of electric cables and optical cables. Part 2: methods specific to elastomeric compounds Section 1:ozone resistance, hot set and mineral oil immersion tests |
| IEC 60811-3-1 | Common test methods for insulating and sheathing materials of electric cables. Part 3: methods specific to PVC compounds Section 1:pressure test at high temperature – tests for resistance to cracking |
| IEC 60811-3-2 | Common test methods for insulating and sheathing materials of electric cables. Part 3: methods specific to PVC compounds Section 2:loss of mass test – thermal stability test |
|
IEC 60811-4-1 | Common test methods for insulating and sheathing materials of electric and optical cables. Part 4: methods specific to polyethylene and polypropylene compounds Section 1: resistance to environmental stress cracking – measurement of the melt flow index, carbon black and/or mineral filler content measurement in polyethylene by direct combustion – measurement of carbon black content by thermogravimetric analysis |
|
IEC 60811-4-2 | Common test methods for insulating and sheathing materials of electric and optical cables. Part 4: methods specific to polyethylene and polypropylene compounds Section 2: tensile strength and elongation at break after conditioning at elevated temperature – wrapping test after conditioning at elevated temperature – wrapping test after thermal ageing in air – measurement of mass increase – long-term stability test – test method for copper-catalyzed oxidative degradation |
| IEC 60811-5-1 | Common test methods for insulating and sheathing materials of electric and optical cables. Part 5: methods specific to filling compounds Section 1: drop-point – separation of oil -lower temperature brittleness – total acid number – absence of corrosive components |
| IEC 60840 | Power cables with extruded insulation and their accessories for rated voltages above 30kV up to 150kV- test methods and requirements |
| IEC 60874-1 | Connectors for optical fibres and cables. Part 1: generic specification |
| IEC 60885-1 | Electrical test methods for electric cables. Part 1: electrical test for cables, cords and wires for voltages up to and including 450/750V |
| IEC 60885-2 | Electrical test methods for electric cables. Part 2: partial discharge tests |
| IEC 60885-3 | Electrical test methods for electric cables. Part 3: test methods for partial discharge measurements on lengths of extruded power cables |
| IEC 60888 | Zinc-coated steel wires for stranded conductors |
| IEC 60889 | Hard-drawn aluminium wire for overhead line conductors |
| IEC 60966-1 | Radio frequency and coaxial cable assemblies. Part 1: generic specification – general requirements and test methods |
| IEC 60966-2-1 | Radio frequency and coaxial cable assemblies. Part 2: sectional specification for flexible coaxial cable assemblies |
| IEC 60974-12 | Arc welding equipment. Part 12: coupling devices for welding cables |
| IEC 61034-1 | Measurement of smoke density of cables burning under defined conditions Part 1: test apparatus |
| IEC 61034-2 | Measurement of smoke density of cables burning under defined conditions Part 2: test procedure and requirements |
| IEC 61073-1 | Mechanical splices and fusion splice protectors for optical fibres and cables Part 1: generic specification |
| IEC 61084-1 | Cable trunking and ducting systems for electrical installations Part 1: general requirements |
| IEC 61084-2 | Cable trunking and ducting systems for electrical installations Part 2: particular requirements Section 1: cable trunking and ducting systems intended for mounting on walls or ceilings |
| IEC 61158-1 | Digital data communications for measurement & control – fieldbus for use in industrial control systems Part 1: overview and guidance |
| IEC 61158-2 | Digital data communications for measurement & control – fieldbus for use in industrial control systems Part 2: physical layer specification and service definition |
| IEC 61158-3 | Digital data communications for measurement & control – fieldbus for use in industrial control systems Part 3: data link service definition |
| IEC 61158-4 | Digital data communications for measurement & control – fieldbus for use in industrial control systems Part 4: data link protocol |
| IEC 61158-5 | Digital data communications for measurement & control – fieldbus for use in industrial control systems Part 5: application layer service definition |
| IEC 61158-6 | Digital data communications for measurement & control – fieldbus for use in industrial control systems Part : application layer protocol specification |
| IEC 61442 | Test methods for accessories for power cables with rated voltage from 6kV up to 30kV |
| IEC 61537 | Cable tray systems and cable ladder systems for cable management |
| IEC 61935-1 | Testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 1: installed cabling |
| IEC 61935-2 | Testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2: patch cords and work area cords |
| IEC/TR 6222 | Fire performance of communication cables installed in buildings |
| ISO/IEC 11801 | Information technology – generic cabling for customer premises |
| ISO/IEC 14709-1 | Information technology – configuration of customer premises cabling for applications Part 1: Integrated Services Digital Network (ISDN) basic access |
| ISO/IEC 14709-2 | Information technology – configuration of customer premises cabling for applications Part 2: Integrated Services Digital Network (ISDN) primary rate |
| ISO/IEC 14763-1 | Information technology – implementation and operation of customer premises cabling Part 1: administration |
| ISO/IEC 15018 | Information technology – generic cabling for homes |
| ISO/IEC/TR 14763-2 | Information technology – implementation and operation of customer premises cabling Part 2: planning and installation |
| ISO/IEC/TR 14763-3 | Information technology – implementation and operation of customer premises cabling Part 3: testing of optical fibre cabling |
| NEK 606 | Cables for offshore installation halogen-free or mud resistant |
| EEMUA 133 | Specification for underground armoured cable protected against solvent penetration and corrosive attack |
| SIWO-KUL | Silicone single core cable with overall polyester braid |
