| Standard | Title |
| DIN VDE 0100 | Erection of power installations with rated voltages below 1000 |
| DIN VDE 0100 Part 100 | General requirements, scope |
| DIN VDE 0100 Part 410 | Protective measures and protection against electric shock |
| DIN VDE 0100 Part 430 | Protection of cables against overcurrent |
| DIN VDE 0100 Part 482 | Choice of protective measures, protection against fire |
| DIN VDE 0100 Part 520 | Selection and erection of equipment – cable, wires and wiring systems |
| DIN VDE 0100 Part 530 | Erection electrical equipment – switch and controlgear |
| DIN VDE 0100 Part 559 | Luminaries and lighting equipment |
| DIN VDE 0100 Part 701 to Part 705 | Rooms containing a bath tub or shower basin. Roofed swimming pools and open air swimming baths. Rooms containing electrical sauna-heaters – installations site. Agricultural and horticultural premises |
| DIN VDE 0100 Part 720 | Fire-hazards locations |
| DIN VDE 0100 Part 726 to Part 738 | Lifting and hoisting devices. Laying of cables in hollow walls and in buildings made up mainly of flammable building materials. Cable entries into buildings in public cable network. Humid and wet areas, outdoor installation |
| DIN VDE 0101 | Erection of power installations with rated voltages above 1000 |
| DIN VDE 0105 | Operation of power installations |
| DIN VDE 0107 | Electrical installations in hospitals and locations for medical use outside hospitals |
| DIN VDE 0108 Part 1 to Part 100 | Power installations and safety power supply in communal facilities, stores and shops and exhibitions rooms, multi-storey buildings, restaurants, closed car parks and working or business premises German DIN VDE Standards business premises |
| DIN VDE 0113 | Electrical equipment of industrial machines |
| DIN VDE 0118 | Erection of electrical installations in mines |
| DIN VDE 0165 | Installation of electrical apparatus in hazardous areas |
| DIN VDE 0166 | Electrical installations and apparatus thereof for use in atmospheres potentially endangered by explosive material |
| DIN VDE 0168 | Erection of electrical installations in open cast mines, quarries and similar plants |
| DIN VDE 0170/0171 | Electrical apparatus for potentially explosive atmospheres |
| DIN VDE 0185 | Lightning protection system, protection of structures against lightning |
| DIN VDE 0207 Part 1 to Part 24 | Insulating and sheathing compounds for cables and flexible cords |
| DIN VDE 0245 Part 1 | Cables and cords for electrical and electronic equipment in power installations |
| DIN VDE 0245 Part 101 to Part 202 | Flexible PVC insulated control cable |
| DIN VDE 0250 Part 1 to Part 819 | Cables, wires and flexible cords for power installations |
| DIN VDE 0253 | Heating – cables |
| DIN VDE 0262 | XLPE (cross linked PE) insulated and PVC sheathed installations cable up to 0.6/1 kV |
| DIN VDE 0265 | Cables with plastic-insulated lead-sheath for power installation |
| DIN VDE 0266 Part 3 & 4 | Halogen-free cables with improved characteristics in the case of fire, with reduced fire propagation and continuance of isolation for use in the containment of nuclear power plants |
| DIN VDE 0267 | Halogen-free cables with improved characteristics in the case of fire, nominal voltages from 6 up to 30kV |
| DIN VDE 0271 | PVC insulated cables and sheathed power cables for rated voltages up to and including 3.6/6 (7.2) kV |
| DIN VDE 0276 Part 603 | Distribution cables of nominal voltages 0.6/1kV |
| DIN VDE 0276 Part 604 | Power cables of nominal voltages 0.6/1kV with special fire performance for use in power stations |
| DIN VDE 0276 Part 604/605 | Additional test methods |
| DIN VDE 0276 Part 620 | Distribution cables of nominal voltages 3.6 to 20.8/36kV1kV |
| DIN VDE 0276 Part 1000 | Current carrying capacity, general, conversion factors |
| DIN VDE 0276 Part 1001 | Tests on cables laid with nominal voltages 6/10kV, 12/20kV and 18/30kV with PVC insulation, VPE insulation or paper insulation |
| DIN VDE 0277 | Primary cables for airport lighting |
| DIN VDE 0281 Part 1 to Part 404 | PVC cables, wires and flexible cords for power installation |
| DIN VDE 0282 Part 1 to Part 808 | Rubber cables and flexible cords for power installation, heat-resistant silicon rubber insulated cable, halogen-free insulated cable arc welding cables, rubber insulated lift cables, rubber sheathed flexible cables |
| DIN VDE 0284 | Mineral insulated cables with a rated voltage not exceeding 750V |
| DIN VDE 0289 Part1 to Part 101 | Definitions for cables, wires and flexible cords for power installation |
| DIN VDE 0292 | Code designation for harmonised cables and flexible cords for power installations |
| DIN VDE 0293 | Core identification for cables and flexible cords used in power installations |
| DIN VDE 0295 | Conductors of cables, wires and flexible cords for power installations |
| DIN VDE 0298 Part 1 to Part 300 | Application of cables and flexible cords in power installations |
| DIN VDE 0472 Part 1 to Part 818 | Testing of cables, wires and flexible cords |
| DIN VDE 0473 up to Part 811 | Insulating and sheathing materials of electric cables, common test methods |
| DIN VDE 0482 up to Part 268 | Measurement of smoke density of cables |
| DIN VDE 0800 Part 1 to Part 10 | Telecommunications |
| DIN VDE 0811 | Ribbon cables with round conductors, with a pitch of 1.27mm |
| DIN VDE 0812 | Equipment wires and stranded equipment wires of telecommunications systems |
| DIN VDE 0813 | Switchboard cables for telecommunications systems |
| DIN VDE 0814 | Cords for telecommunications systems |
| DIN VDE 0815 | Wiring cables for telecommunications systems ( indoor cable) |
| DIN VDE 0816 Part 1 to Part 3 | Outdoor cables for telecommunications systems |
| DIN VDE 0817 | Cables with stranded conductors for increased mechanical stress for telecommunications systems |
| DIN VDE 0818 | Self-supporting telecommunication aerial cables on overhead power lines above 1kV |
| DIN VDE 0839 | Electromagnetic compatibility |
| DIN VDE 0881 | Equipment wires and flexible equipment wires with extended temperature |
| DIN VDE 0891 Part 1 to Part 10 | Special directions and guiding principles of cables and insulated wires |
| DIN VDE 0899 Part 1 to Part 5 | Special specification for optical fibre, single core, indoor and outdoor cables |
| DIN 22419-1 | Electrical apparatus for potentially explosive atmospheres for mining cable entries Part 1: safety requirements and testing |
| DIN 22419-2 | Electrical apparatus for potentially explosive atmospheres for mining cable entries Part 2: gland adaptors for entries; safety requirements and testing |
| DIN 4102-12 | Fire behaviour of building materials and elements – Fire resistance of electric cable systems required to maintain circuit integrity – requirements and testing |
| DIN 4102-9 | Fire behaviour of building materials and elements -seals for cable penetrations; concepts, requirements and testing |
| DIN 43629-1 | Cable distribution cubicle, cabinet, mounting dimensions |
| DIN 43629-2 | Cable distribution cubicle, base, mounting dimensions |
| DIN 43629-3 | Cable distribution cubicle, internal construction, mounting dimensions |
| DIN 43629-4 | Cable distribution cabinet with low construction depth |
| DIN 46235 | Cable lugs for compression connections, cover plate type, for copper conductors |
| DIN 46329 | Cable lugs for compression connections, ring type for aluminium conductors |
| DIN 47613-2 | Cable accessories, branch off sleeves for telecommunication cables, protected underground couplings for sheathed cables |
| DIN 47613-4 | Cable accessories, branch off sleeves for telecommunication cables, cable clip |
| DIN 54841-5 | Plastic warning devices for underground cables and pipelines Part 5: cable cover |
| DIN EN 12548 | Lead & lead alloys – lead alloy ingots for electric cable sheathing and for sleeves |
| DIN EN 50289-1-13 | Communication cables – specifications for test methods Part 1-13: electrical test methods |
| DIN EN 50289-1-16 | Communication cables – specifications for test methods Part 1-16: electromagnetic performance |
| DIN EN 50289-3-11 | Communication cables – specifications for test methods Part 3-11: mechanical test methods, cable cut-through resistance |
| DIN EN 50289-3-15 | Communication cables – specifications for test methods Part 3-15: mechanical test methods, underwater cable resistance to hydrostatic pressure |
| DIN EN 50289-3-16 | Communication cables – specifications for test methods Part 3-16: mechanical test methods, cable tensile performance |
| DIN EN 50289-3-5 | Communication cables – specifications for test methods Part 3-5: mechanical test methods, crush resistance of the cable |
| DIN EN 50289-3-6 | Communication cables – specifications for test methods Part 3-6: mechanical test methods, impact resistance |
| DIN EN 50289-3-7 | Communication cables – specifications for test methods Part 3-7: mechanical test methods, abrasion resistance |
| DIN EN 50289-3-8 | Communication cables – specifications for test methods Part 3-6: mechanical test methods, abrasion resistance of cable sheath markings |
| DIN 60966-1 | Radio frequency and coaxial assemblies Part 1: Generic specification, general requirements and test methods |
| DIN IEC 61196-1-101 | Coaxial communication cables Part 1-101: electrical test methods, test for conductor resistance of cable |
| DIN 89160 | Electrical cables for ships and offshore units – single and mulitcore power cables with extruded solid insulation without screen – type MGG, MGH, halogen free |
