| British Standard |
Title |
| BS 638-4:1996 |
Arc welding power sources, equipment and accessories. Specification for welding cables |
| BS 3858:1992 |
Specification for binding & identification sleeves for use on electric cables and wires |
| BS 3988:1970 |
Specification for wrought aluminium for electrical purposes. Solid conductors for insulated cables |
| BS 4553-1:1998 |
Specification for 600/100V single-phase, split concentric electric cables. Cables having PVC insulation |
| BS 4553-2:1998 |
Specification for 600/100V single-phase, split concentric electric cables. Cables having thermosetting insulation |
| BS 4553-3:1998 |
Specification for 600/100V single-phase, split concentric electric cables. Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire |
| BS 4737-3.30:1986 |
Intruder alarm systems. Specifications for components. Specification for PVC insualted cables for interconnecting wiring |
| BS 4808-1:1972 |
Specification for LF cables and wires with PVC insulation and PVC sheath for telecommunication. General requirements and tests |
| BS 4808-2:1972 |
Specification for LF cables and wires with PVC insulation and PVC sheath for telecommunication. Equipment wires with solid or stranded conductors, unscreened, single |
| BS 5099:2004 |
Electric cables Voltage levels for spark testing |
| BS 5266-1:2005 |
Emergency lighting. Code of practice for the emergency lighting of premises |
| BS 5308-1:1986 |
Insulated cables, instrumentation, PE |
| BS 5308-2:1986 |
Insulated cables, instrumentation, PVC |
| BS 5372:1997 |
Specification for dimensions of cable terminations for multi-core extruded solid dielectirc insulated distribution cables of rated voltages 600/1000V and 1900/3300V having copper or insulated distribution cables of rated voltages 600/1000V and 1900/3300V having copper or |
| BS 5467:1997 |
Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000V and 1900/3300V |
| BS 5839-1:2002 |
Fire detection and fire alarm systems for buildings. Code of practice for system design, installation, commissioning and maintenance |
| BS 6004:2000 |
Electric cables. PVC insulated, nonarmoured cables for voltages up to and including 450/750V, for electric power, lighting and internal wiring |
| BS 6007:2006 |
Electric cables. Single core unsheathed heat resisting cables for voltages up to and including450/750V for internal wiring |
| BS 6121-1:2005 |
Mechanical cable glands. Armour glands. Requirements and test methods |
| BS 6121-5:2005 |
Mechanical cable glands. Code of practice for selection, installation and inspection of cable glands and armour glands |
| BS 6195:2006 |
Electric cables. Rubber or silicone rubber insulated flexible cables and cords for coil end leads |
| BS 6207-3:2001 |
Mineral insulated cables copper sheathed with copper conductors |
| BS 6231:2006 |
Electric cables. Single core PVC insulated flexible cables of rated voltage 600/1000 V for switchgear and controlgear wiring |
| BS 6234:1987 |
Specification for polyethylene insulation and sheath of electric cables |
| BS 6346:1997 |
Electric cables. PVC insulated, armoured cables for voltages of 600/1000V and 1900/3300V |
| BS 6387:1994 |
Specification for performance requirements for cables required to maintain circuit integrity under fire conditions |
| BS 6480:1988 |
Power cables, impregnated paper insulated, lead or lead alloy sheathed electric cables |
| BS 6485:1999 |
PVC covered conductors for overhead power lines |
| BS 6500:2000 |
Electric Cables. Flexible cords rated up to 300/500V, for use with appliances and equipment intended for domestic, office and similar environments |
| BS 6622:2007 |
Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6kV to 19/33kV. Requirements and test methods |
| BS6701:2004 |
Telecomms equipment and telecomms cabling, specification for installation, operation and maintenance |
| BS 6708:1998 |
Flexible cables for use at mines and quarries |
| BS 6724:1997 |
Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000V and 1900/3300V, having low emission of smoke and corrosive gases when affected by fire |
| BS 6883:1999 |
Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods |
| BS 6920-1:2000 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Specification |
| BS 6920-2.1:2000 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test. Samples for testing |
| BS 6920-2.2.1:2000 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test. Odour & flavour of water. General method of test |
| BS 6920-2.2.2:2000 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Odour & flavour of water. Method of testing odours & flavours imparted to water by hoses & composite pipes & tubes |
| BS 6920-2.2.3:2000 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test. Odour & flavour of water. Methods of testing tastes imparted to water by hoses for conveying water for food and drink preparation |
| BS 6920-2.3:2000 |
Suitability of non-metallic prducts for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test. Appearance of water |
| BS 6920 2 4 2000 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test. Growth of aquatic microorganisms test |
| BS 6920-3:2000 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. High temperature test |
| BS 6920-4:2001 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods for GCMS identification of water leachable organic susbstances |
| BS 7197:1990 |
Specification for performance of bonds for electric power cable terminations and joints for system voltages up to 36kV |
| BS 7211:1998 |
Electric cables. Thermosetting insulated, unarmoured cables for voltages up to & including 450/750V, for electric power, lighting & internal wiring, and having low emission of smoke and corrosive gases when affected by fire |
| BS 7540-2:2005 |
Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750V. Harmonised cable types for HD21 and HD22 |
| BS 7629-1:2008 |
Electric Cables. Specification for 300/500V fire resistant screened cables having low emission of smoke and corrosive gases when affected by fire. Multicore & multipair cables |
| BS 7655-0:2006 |
Specification for insulating and sheathing materials for cables. General introduction |
| BS 7655-1.2:1997 |
Specification for insulating and sheathing materials for cables. Cross-linked elastomeric insulating compounds. General 90 deg C application |
| BS 7655-1.3:2000 |
Specification for insulating and sheathing materials for cables. Elastomeric sheathing compounds. XLPE |
| BS 7655-1.4:2000 |
Specification for insulating and sheathing materials for cables. Elastomeric sheathing compounds. Oil resisting types |
| BS 7655-1.5:2000 |
Specification for insulating and sheathing materials for cables. Cross-linked elastomeric insulating compounds. Flame retardant composites |
| BS 7655-2.3:2000 |
Specification for insulating and sheathing materials for cables. Elastomeric sheathing compounds. General applications |
| BS 7655-2.4:2000 |
Specification for insulating and sheathing materials for cables. Elastomeric sheathing compounds. Welding cable covering. |
| BS 7655-2.6:2000 |
Specification for insulating and sheathing materials for cables. Elastomeric sheathing |
| BS 7655-3.2:2000 |
Specification for insulating and sheathing materials for cables. PVC sheathing compounds. Hard grade types |
| BS 7655-4.2:2000 |
Specification for insulating and sheathing materials for cables. PVC sheathing compounds. General application |
| BS 7655-6.1:1997 |
Specification for insulating and sheathing materials for cables.Thermoplastic sheathing compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fire. General application thermoplastic types |
| BS 7655-10.1:2000 |
Specification for insulating and sheathing materials for cables.Polyethylene sheathing compounds Thermoplastic medium density polyethylene (MDPE) sheathing compound |
| BS 7671:2008 |
Requirements for electrical installations. IEE wiring regulations 17th edition |
| BS 7769-1.2:1994 |
Electric Cables. Calculation of the current rating. Current rating equations (100% load factor) & calculation of losses. Sheath eddy current loss factors for two circuits in flat formation |
| BS 7769-2.2:1997 |
Electric Cables. Calculation of the current rating. Thermal resistance. A method for calculating reduction factors for groups of cables in free air, protected from solar radiation |
| BS 7769-3.1:1997 |
Electric Cables. Calculation of the current rating. Sections on operating conditions |
| BS 7835:2007 |
Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6kV up to 19/33kV having low emission of smoke and corrosive gases when affected by fire. Requirements and test methods |
| BS 7846:2000 |
Electric cables. 600/100V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire |
| BS 7870-1:1996 |
LV & MV polymeric insulated cables for use by distribution and generation utilities. General |
| BS 7870-2:1999 |
LV & MV polymeric insulated cables for use by distribution and generation utilities. Methods of test |
| BS 7870-3.5:2005 |
LV & MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1kv. XLPE insulated, copper wire waveform or helical |
| BS 7870-3.11:2001 |
LV & MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1kv. XLPE insulated combined neutral & earth copper |
| BS 7870-4.10:2000 |
LV & MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated voltages of 11kv and 33kv. Single core 11kv and 33kv |
| BS 7870-8.1:2003 |
LV & MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground. Single wire armoured and PVC sheathed multicore cable with copper conductors |
| BS 7870-8.2:2003 |
LV & MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground. Single wire armoured and PVC sheathed multipair cable with copper conductors |
| BS 7870-8.3:2003 |
LV & MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground. Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation |
| BS 7870-8.6:2003 |
LV & MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground. Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors |
| BS 7884:1997 |
Specification for copper and copper-cadmium stranded conductors for overhead electric traction and power transmission system |
| BS 7889:1997 |
Electric cables. Thermosetting insulated, unarmoured cables for a voltage of 600/1000V |
| BS 7917:1999 |
Elastomer insulated fire resistant cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods |
| BS 7919:2001 |
Electric cables. Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments |
| BS 7970:2005 |
Electric cables.Metallic wire & foil sheath constructions of power cables having XLPE insulation for rated voltages from 66KV to 132KV |
| BS 8434-2:2003 |
Methods of test for assessment of the fire integrity of electric cables. Test for unprotected small cables for use in emergency circuits. BS EN 50200 with 930 deg flame and with water spray |
| BS 8436:2004 |
Electric cables. 300/500V Screened electric cables having low emission of smoke & corrosive gases when affected by fire, for use in walls, partitions & building voids. Multicore cables |
| BS EN 10257-1:1998 |
Zinc or zinc alloy coated non-alloy steel wire for armouring either power or telecomms cables. Land cables |
| BS EN 10257-2:1998 |
Zinc or zinc alloy coated non-alloy steel wire for armouring either power or telecomms cables. Submarine cables |
| BS EN 12548:1999 |
Lead and alloys. Lead alloy ingots for electric cable sheathing and for sleeves |
| BS EN 13602:2002 |
Copper and copper alloys. Drawn, round copper wire for the manufacture of electrical conductors |
| BS EN 45510-2-8:2004 |
Guide for procurement of power station equipment Part 2-8 electrical equipment- power cables |
| BS EN 50014:1998 |
Electrical apparatus for potentially explosive atmospheres. General requirements |
| BS EN 50018:2000 |
Electrical apparatus for potentially explosive atmospheres. Flameproof enclosure ‘d’ |
| BS EN 50085-1:1999 |
Cable trunking and cable ducting systems for electrical installations. General requirements |
| BS EN 50098-1:1999 |
Customer premised cabling for information technology. ISDN basic access |
| BS EN 50117-2-1:2005 |
Coaxial cables. Sectional specification for cables used in cabled distribution networks. Indoor drop cables for systems operating at 5MHz – 1000MHz |
| BS EN 50117-2-2:2004 |
Coaxial cables. Sectional specification for cables used in cabled distribution networks. Outdoor drop cables for systems operating at 5MHz – 1000MHz |
| BS EN 50117-2-3:2004 |
Coaxial cables. Sectional specification for cables used in cabled distribution networks. Distribution and trunk cables operating at 5MHz – 1000MHz |
| BS EN 50117-2-4:2004 |
Coaxial cables. Sectional specification for cables used in cabled distribution networks. Indoor drop cables for systems operating at 5MHz – 3000MHz |
| BS EN 50117-2-5:2004 |
Coaxial cables. Sectional specification for cables used in cabled distribution networks. Outdoor drop cables for systems operating at 5MHz – 3000MHz |
| BS EN 50117-3:1996 |
Coaxial cables used in cabled distribution networks. Sectional specification for outdoor drop cables |
| BS EN 50117-4:1996 |
Coaxial cables used in cabled distribution networks. Sectional specification for distribution and trunk cables |
| BS EN 50117-5:1997 |
Coaxial cables used in cabled distribution networks Sectional specification for indoor drop cables for systems operating at 5MHz – 2150MHz |
| BS EN 50117-6:1997 |
Coaxial cables used in cabled distribution networks. Sectional specification for outdoor drop cables for use in networks operating at 5MHz – 2150MHz |
| BS EN 50143:1999 |
Cables for signs and luminous discharge tube installations operating from a no-load rated output voltage exceeding 1kV but not exceeding 10kV |
| BS EN 50146:2000 |
Cable ties for electrical installations |
| BS EN 50173-2:2007 |
Information Technology. Generic Cabling Systems. Office Premises |
| BS EN 50173-3:2007 |
Information Technology. Generic Cabling Systems. Industrial Premises |
| BS EN 50173-4:2007 |
Information Technology. Generic Cabling Systems. Homes |
| BS EN 50173-5:2007 |
Information Technology. Generic Cabling Systems. Data Centres |
| BS EN 50174 |
Information Technology – cabling installation |
| BS EN 50183:2000 |
Conductors for overhead lines. Aluminium-magnesium-silicon alloy wires |
| BS EN 50189:2000 |
Conductors for overhead lines. Zinc coated steel wires |
| BS EN 50200:2006 |
Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
| BS EN 50214:2006 |
Flat polyvinyl chloride sheathed flexible cable |
| BS EN 50262:1999 |
Cable glands for electrical installations |
| BS EN 50264-1:2008 |
Railway applications. Railway rolling stock power & control cables having special fire performance. Standard wall. General requirements |
| BS EN 50264-2.1:2008 |
Railway applications. Railway rolling stock power & control cables having special fire performance. Cables with cross-linked elastomeric insulation. Single core cables |
| BS EN 50264-2.2:2008 |
Railway applications. Railway rolling stock power & control cables having special fire performance. Cables with cross-linked elastomeric insulation. Multi core cables |
| BS EN 50264-3.1:2008 |
Railway applications. Railway rolling stock power & control cables having special fire performance. Cables with cross-linked elastomeric insulation with reduced dimensions. Single core cables |
| BS EN 50264-3.2:2008 |
Railway applications. Railway rolling stock power & control cables having special fire performance. Cables with cross-linked elastomeric insulation with reduced dimensions. Multi core cables |
| BS EN 50265-1:1998 |
Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cables Part 1: apparatus |
| BS EN 50265-2-1:1998 |
Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cables Part 2-1: procedures – 1kW pre-mixed flame |
| BS EN 50265-2-2:1998 |
Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cables Part 2-2: procedures – diffusion flame |
| BS EN 50266-1:2001 |
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables |
| BS EN 50266-2-1:2001 |
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables Part 2-1 Procedures Category A F/R |
| BS EN 50266-2-2:2001 |
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables Procedures Category A |
| BS EN 50266-2-3:2001 |
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables Part 2-3 Procedures Category B |
| BS EN 50266-2-4:2001 |
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables Part 2-4 Procedures Category C |
| BS EN 50266-2-5:2001 |
Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables Part 2-5 Procedures – small cables -Category D |
| BS EN 50267-1:1999 |
Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Apparatus |
| BS EN 50267-2-1:1999 |
Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures. Determination of the amount of halogen acid gas |
| BS EN 50267-2-2:1999 |
Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures. Determination of degree of acidity of gases for materials by measuring pH and conductivity |
| BS EN 50267-2-3:1999 |
Common test methods for cables under fire conditions Tests on gases evolved during combustion of materials from cables. Procedures. Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity |
| BS EN 50268-1:2000 |
Common test methods for cables under fire conditions. Measurement of smoke density of cables buring under defined conditions. Apparatus |
| BS EN 50288-1:2003 |
Multi-element metallic cables used in analogue and digital communication and control. Generic specification |
| BS EN 50288-3-2:2003 |
Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables. Work area and patch cord cables |
| BS EN 50288-7:2005 |
Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for instrumentation and control cables |
| BS EN 50289-1-1:2001 |
Communication cables. Specifications for test methods. Electrical test methods. General requirements |
| BS EN 50289-1-2:2001 |
Communication cables. Specifications for test methods. Electrical test methods. D.C. resistance |
| BS EN 50289-1-3 |
Communication cables – specifications for test methods Part 1-3: electrical test methods, Dielectric strength |
| BS EN 50289-1-4 |
Communication cables – specifications for test methods Part 1-4: electrical test methods, Insulation resistance |
| BS EN 50289-1-5 |
Communication cables – specifications for test methods Part 1-5: electrical test methods, Capacitance |
| BS EN 50289-1-6 |
n cables – specifications for test methods Part 1-6: electrical test methods, Electromagnetic performance |
| BS EN 50289-1-7 |
Communication cables – specifications for test methods Part 1-7: electrical test methods, Velocity of propagation |
| BS EN 50289-1-8 |
Communication cables – specifications for test methods Part 1-8: electrical test methods, Attenuation |
| BS EN 50289-1-9 |
Communication cables – specifications for test methods Part 1-9: electrical test methods, Unbalance attenuation |
| BS EN 50289-1-10 |
Communication cables – specifications for test methods Part 1-10: electrical test methods, Crosstalk |
| BS EN 50289-1-13 |
Communication cables. Specifications for test methods. Electrical test methods. Coupling attenuation or screening attenuation of patch cords/coaxial cable assemblies/pre-connectorised cables |
| BS EN 50289-1-16 |
Communication cables – specifications for test methods Part 1-16: electromagnetic performance |
| BS EN 50289-3-2 |
Communication cables – specifications for test methods Part 3-2: mechanical test methods, Tensile strength and elongation for conductor |
| BS EN 50289-3-4 |
Communication cables – specifications for test methods Part 3-4: mechanical test methods, shrinkage of insulation |
| BS EN 50289-3-5 |
Communication cables – specifications for test methods Part 3-5: mechanical test methods, crush resistance of the cable |
| BS EN 50289-3-6 |
Communication cables – specifications for test methods Part 3-6: mechanical test methods, impact resistance |
| BS EN 50289-3-7 |
Communication cables – specifications for test methods Part 3-7: mechanical test methods, abrasion resistance |
| BS EN 50289-3-8 |
Communication cables – specifications for test methods Part 3-8: mechanical test methods, abrasion resistance of cable sheath markings |
| BS EN 50289-3-9 |
Communication cables – specifications for test methods Part 3-9: mechanical test methods, bending tests |
| BS EN 50289-3-10 |
Communication cables – specifications for test methods Part 3-10: mechanical test methods, torsion and twisting |
| BS EN 50289-3-11 |
Communication cables – specifications for test methods Part 3-11: mechanical test methods, cable cut-through resistance |
| BS EN 50289-3-15 |
Communication cables – specifications for test methods Part 3-15: mechanical test methods, underwater cable resistance to hydrostatic pressure |
| BS EN 50289-3-16 |
Communication cables – specifications for test methods Part 3-16: mechanical test methods, cable tensile performance |
| BS EN 50290-2-1:2005 |
Communications cables. Common design rules and construction |
| BS EN 50290-2-21:2002 |
Communications cables. Common design rules and construction. PVC insulation compounds |
| BS EN 50290-2-24:2002 |
Communications cables. Common design rules and construction. PE sheathing |
| BS EN 50306-2:2002 |
Railway applications. Railway rolling stock cables having special fire performance. Thin wall. Single core cables |
| BS EN 50306-4:2002 |
Railway applications. Railway rolling stock cables having special fire performance. Thin wall. Multicore and multipair cables standard wall sheathed |
| BS EN 50307:2002 |
Lead and alloys. Lead and lead alloy sheaths and sleeves of electric cable |
| BS EN 50328-1:2008 |
Railway applications. Railway rolling stock high temperature power cables having special fire performance. General requirements |
| BS EN 50334:2001 |
Marking by inscription for the identification of cores of electric cables |
| BS EN 50356:2003 |
Method of spark testing of cables |
| BS EN 50362:2003 |
Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits |
| BS EN 50363-0:2005 |
Insulating, sheathing and covering materials for low voltage energy cables. Part 0: general |
| BS EN 50363-1:2005 |
Insulating, sheathing and covering materials for low voltage energy cables. Part 1: cross-linked elastomeric insulating compounds |
| BS EN 50363-2-1:2005 |
Insulating, sheathing and covering materials for low voltage energy cables. Part 2-1: cross-linked elastomeric sheathing compounds |
| BS EN 50363-2-2:2005 |
Insulating, sheathing and covering materials for low voltage energy cables. Part 2-2: cross-linked elastomeric covering compounds |
| BS EN 50363-3:2005 |
Insulating, sheathing and covering materials for low voltage energy cables. PVC insulating compounds |
| BS EN 50363-4-1:2005 |
Insulating, sheathing and covering materials for low voltage energy cables. PVC sheathing compounds |
| BS EN 50363-4-2:2005 |
Insulating, sheathing and covering materials for low voltage energy cables. PVC covering compounds |
| BS EN 50363-5:2005 |
Insulating, sheathing and covering materials for low voltage energy cables. Part 5: halogen-free, cross-linked insulating compounds |
| BS EN 50363-6:2005 |
Insulating, sheathing and covering materials for low voltage energy cables. Part 6: halogen-free, cross-linked sheathing compounds |
| BS EN 50363-7:2005 |
Insulating, sheathing and covering materials for low voltage energy cables. Part 7: halogen-free, thermoplastic insulating compounds |
| BS EN 50363-8:2005 |
Insulating, sheathing and covering materials for low voltage energy cables. Part 8: halogen-free, thermoplastic sheathing compounds |
| BS EN 50363-9-1:2005 |
Insulating, sheathing and covering materials for low voltage energy cables. Part 9-1: miscellaneous insulating compounds – cross-linked polyvinyl chloride (XLPVC) |
| BS EN 50363-10-1:2005 |
Insulating, sheathing and covering materials for low voltage energy cables. Part 10-1: miscellaneous sheathing compounds – cross-linked polyvinyl chloride (XLPVC) |
| BS EN 50363-10-2:2005 |
Insulating, sheathing and covering materials for low voltage energy cables. Part 10-2: miscellaneous sheathing compounds – thermoplastic polyurethane |
| BS EN 50368:2003 |
Cable cleats for electrical installations |
| BS EN 50395:2005 |
Electrical test methods for low voltage energy cables |
| BS EN 50396:2005 |
Non electrical test methods for low voltage energy cables |
| BS EN 50414:2006 |
Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables – method A: total lead content determination with flame excitation atmoic absorption spectrometry Method B: qualitative analysis of lead by lead sulphide staining |
| BS EN 60079-0:2006 |
Electrical apparatus for explosive gas atmospheres. General requirements |
| BS EN 60079-1:2007 |
Electrical apparatus for explosive gas atmospheres.Flameproof enclosures ‘d’ |
| BS EN 60079-7:2007 |
Electrical apparatus for explosive gas atmospheres.Increased safety ‘e’ |
| BS EN 60228:2005 |
Conductors of insulated cables |
| BS EN 60230:2003 |
Impulse tests on cables and their accessories |
| BS EN 60332-1-1:2004 |
Tests on electric & optical fibre cables under fire conditions. Test for vertical flame propagation for a single vertical insulated wire or cable. – apparatus |
| BS EN 60332-1-2:2004 |
Tests on electric & optical fibre cables under fire conditions. Test for vertical flame propagation for a single vertical insulated wire or cable. Procedure for 1kW pre-mixed flame |
| BS EN 60332 1 3 2004 |
Tests on electric & optical fibre cables under fire conditions. Test for vertical flame propagation BSEN 60332-1-3:2004 f i l ti l i l t d i bl P d f d t i ti f fl i for a single vertical insulated wire or cable. Procedure for determination of flaming droplets/particles |
| BS EN 60332-2-1:2004 |
Tests on electric & optical fibre cables under fire conditions. Tests for vertical flame propagation for a single vertical insulated wire or cable. Apparatus |
| BS EN 60332-2-2:2004 |
Tests on electric & optical fibre cables under fire conditions. Tests for vertical flame propagation for a single vertical insulated wire or cable. Procedure for diffusion flame |
| BS EN 60584-3:2008 |
Thermocouples. Extension and compensating cables. Tolerances and idenification system |
| BS EN 60702-1:2002 |
Mineral insulated cables & their terminations with a rated voltage not exceeding 750V. Part 1: cables |
| BS EN 60702-2:2002 |
Mineral insulated cables & their terminations with a rated voltage not exceeding 750V. Terminations |
| BS EN 60719:1993 |
Calculation of the lower and upper limits for the average outer dimension of cables with circular copper conductors and of rated voltages up to and including 450/750V |
| BS EN 60794-1-1 |
Optical fibre cables. Part 1-1: Generic specification – General |
| BS EN 60794-1-2 |
Optical fibre cables. Part 1-2: Generic specification – Basic optical cable test procedures |
| BS EN 60794-2 |
Optical fibre cables. Part 2: Indoor cables, sectional specification |
| BS EN 60794-2-10 |
Optical fibre cables. Part 2-10: Indoor cables, family specification for simplex and duplex cables |
| BS EN 60794-2-11 |
Optical fibre cables. Part 2: Indoor cables Section 11:detailed specification for simplex and duplex cables for use in premises cabling |
| BS EN 60794-2-20 |
Optical fibre cables. Part 2: Indoor cables Section 20:family specification for multi-fibre optical distribution cables |
| BS EN 60794-2-21 |
Optical fibre cables. Part 2: Indoor cables Section 21:detailed specification for multi-fibre optical distribution cables for use in premises cabling |
| BS EN 60794-2-31 |
Optical fibre cables. Indoor cables. Detailed specification for optical fibre ribbon cables for use in premises cabling |
| BS EN 60794-3-10 |
Optical fibre cables. Part 3: sectional specification – outdoor cables Section 10: family specification for duct and directly buried optical telecommunication cables |
| BS EN 60794-3-12 |
Optical fibre cables. Part 3: sectional specification – outdoor cables Section 12: detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling |
| BS EN 60811-1-1:1995 |
Insulating & sheathing materials of electric cables. Common test methods. General application. Measurement of thickness and overall dimensions. Tests for determining the mechanical properties |
| BS EN 60811-1-2:1995 |
Insulating & sheathing materials of electric cables. Common test methods. Part1-2 General application -thermal ageing methods |
| BS EN 60811-1-3:1995 |
Insulating & sheathing materials of electric cables. Common test methods. General application. Methods for determining the density. Water absorption tests. Shrinkage test. |
| BS EN 60811-1-4:1995 |
Insulating & sheathing materials of electric cables. Common test methods. General application. Tests at low temperature |
| BS EN 60811-2-1:1998 |
Insulating & sheathing materials of electric cables. Common test methods. Methods specific to elastomeric compounds. Ozone resistance, hot set and mineral oil immersion tests |
| BS EN 60811-3-1:1995 |
Insulating & sheathing materials of electric and optical cables. Common test methods. Part 3-1: Methods specific to PVC compounds. Pressure test at high temperature – tests for resistance to cracking |
| BS EN 60811-3-2:1995 |
Insulating & sheathing materials of electric and optical cables. Common test methods. Part 3-2: Methods specific to PVC compounds.Loss of mass test – thermal stability test |
| BS EN 60811-4-1:2004 |
Insulating & sheathing materials of electric and optical cables. Common test methods. Part 4: Methods specific to polyethylene and polypropylene compounds. Section 1: resistance to environmental stress cracking – measurement of the melt flow index – carbon black and/or mineral content measurement in polyethylene by direct combustion – measurement of carbon black contect by thermogravimetric analysis (TGA) – assessment of carbon black dispersion in polyethylene using a microscope |
| BS EN 60811-4-2:2004 |
Insulating & sheathing materials of electric and optical fibre cables. Common test methods. Part 4: Methods specific to polyethylene and polypropylene compounds. Section 2: tensile strength and elongation at break after conditioning at elevated temperature Wrapping test after and elongation at break after conditioning at elevated temperature Wrapping test after conditioning at elevated temperature – wrapping test after thermal ageing in air Measurement of mass increase – long-term stability test – test method for copper-catalysed oxidative degradation |
| BS EN 60811-5-1:2000 |
Insulating & sheathing materials of electric & optical fibre cables. Common test methods. Methods specific to filling compounds. Drop point. Separation of oil. Lower temperature brittleness. Total acid number. Absence of corrosive components. Permittivity at 23 degC D.C. resistivity at 23 degC and 100 degC |
| BS 60885-2:2003 |
Electrical test methods for electric cables. Partial discharge tests |
| BS 60885-3:2003 |
Electrical test methods for electric cables. Test methods for partial discharge measurements on lengths of extruded power cables |
| BS EN 60889:1997 |
Hard drawn aluminium wire for overhead line conductors |
| BS EN 61034-1:2005 |
Measurement of smoke density of cables burned under defined conditions. Test apparatus |
| BS EN 61034-2:2005 |
Measurement of smoke density of cables burned under defined conditions. Test procedure and requirements |
| BS EN 61067-1:1997 |
Glass & glass polyester fibre woven tapes. Definitions, classification and general requirements |
| BS EN 61138:2007 |
Cables for portable earthing and short-circuit equipment |
| BS EN 61158-1 |
Digital data communications for measurement & control – fieldbus for use in industrial control systems Part 1: overview and guidance |
| BS EN 61158-2 |
Digital data communications for measurement & control – fieldbus for use in industrial control systems Part 2: physical layer specification and service definition |
| BS EN 61158-3 |
Digital data communications for measurement & control – fieldbus for use in industrial control systems Part 3: data link service definition |
| BS EN 61158-4 |
Digital data communications for measurement & control – fieldbus for use in industrial control systems Part 4: data link protocol |
| BS EN 61158-5 |
Digital data communications for measurement & control – fieldbus for use in industrial control systems Part 5: application layer service definition |
| BS EN 61158-5-10:2008 |
Industrial communication networks. Fieldbus specifications |
| BS EN 61158-6 |
Digital data communications for measurement & control – fieldbus for use in industrial control systems Part : application layer protocol specification |
| BS EN 61316:2000 |
Cable tray systems and cable ladder systems for cable management |
| BS EN 61537:2007 |
Industrial communication networks. Profiles. Fieldbus profiles |
| BS EN 61784-1:2007 |
Electric cables Calculation of the current rating. General |
